Category Archives: Canon Printer Code 5100

30Nov/17

How to Fix Canon mp510 Printer Error Code 5100?

If your Canon mp510 Printer was working perfectly fine until a few times ago, it suddenly stops working and displaying an error 5100, then you need to panic about it. You can quickly Fix Canon mp510 Printer Error Code 5100, by just pursuing some troubleshooting solutions. Usually, an error 5100 code is saying that the ink carriage has problems. Typically something currently is or recently hammed the cartridge carriage, and there is a problem with the printer, and may you need to inspect the Printer inside to see any stray pieces of paper along the paper’s usual route. Even something has fallen into the printer, or a piece of paper has been jammed in there. Well, it’s time to resolve by following either below mention blog steps or you can connect to Canon Printer Support Number for connecting with certified professionals for resolving Canon mp510 Printer Error Code 5100 online remote assistance immediate.

Cause of Canon mp510 Printer Error Code 5100:-

  • Ink Carriage
  • Broken Canon Printer
  • Printer is not running
  • Piece of paper has been jammed in the printer
  • Foreign object blocking your cartridge carriage that disables it from moving

Solutions to Canon mp510 Printer Error Code 5100:-

Solution 1:- Check for Canon mp510 Printer Connection

You should try to check for a Canon printer connection, in order to see its proper functioning or not.

  • Go to your computer, and click on “Start” button and then select “Devices and Printers” section.
  • Then you will see your Canon mp510 printer appear, under heading “Printers and Faxes” area, means your Printer connects well with your PC. In case, your Canon mp510 printer there is not showing means it proves your Printer don’t connect to your PC.

Now connect the printer again by checking proper peripheral connections & power cord.

Solution 2:- Unplugging the Printer Power Cord and Then Plugging

You should try to unplug the unit from the power source and then plug it. Often unplugging the unit from the power source and then plugging it back again can clear the error message.

If the message continues to appear on the LCD or your computer/printer. Then go to the  next solution.

Solution 3:- Inspect the Inside To Observe Any Stray pieces of paper or Paper Jammed

With the printer turned off and the power cord unplugged, open the printer and inspect the inside the printer to see any stray pieces of paper along the paper’s usual route? Also, look inside for a tiny object or things like a paper clip, staple, debris and small pieces of paper.

If you are found tiny objects, then immediately remove it, or clean it with clothes.

Solution 4:- Ensure that the Timing Strip is cleaned

Ensure that the timing strip is cleaned and free of dirt. The timing strip is a white small transparent plastic that usually stays in front or below the drive belt. Also, there is another similar strip that you could clean, it has a black vertical line running across on this strip. Make sure that there are no ink or dirt sticking to the strip, use a soft piece of tissue to clean it.

The purpose of this strip is to control the movement of the printer head and guiding to go back and forth.

Solution 5:- Reseat the Ink Cartridges To Clear the Error Code 5100

You should try to reset your Canon mp510 Printer ink cartridges to fix the issue.

Follow these steps to do tasks:-

  • Turn off the Canon mp510 printer and unplug it from the outlet.
  • Press the “On/Off” button while you plug the cable back in.
  • Hit the “Stop/Reset” button two times while holding down the “On/Off” button, then let go of the “On/Off” button. This puts the printer into factory mode.
  • Hit the right arrow button until you see “Shipping Mode 3” on the LCD display. Hit “OK” to select it.
  • Hit the “Stop/Reset” button when you see a message that says “Without Cleaning.” This tells the Canon printer to print out a test page.
  • Lift up the Canon mp510 printer cover and wait for the cartridges to move to the left. Then unplug the printer from the outlet.
  • Lift out both ink cartridges and close the cover.
  • Plug the power cable back in and hit the “On/Off” button.
  • Place the ink cartridges back inside once you see a message that says “Replace Cartridges.”
  • Wait a few minutes for the printer to recognize the cartridges before trying to print.

Now check the error is resolved, if not, then go to the next solution.

Solution 6:- Remove and Reset all of The Ink Tanks in the Printer

You should try to resolve the issue by trying to remove and reset all of the Ink tanks in the Printer.

Follow these steps to do tasks:-

  • With a flashlight or other bright light, please check the paper feed areas of the printer and verify that there are no paper jams or obstructions in the printer that may be causing the error.
  • Then look inside of the printer where the inks are located and ensure that there are no obstructions in there that may be causing the print head not to move freely.
  • Next, remove and reset all of the ink tanks in the printer.

Now perform the task with your Canon mp510 Printer, and see the error is resolved

If you still experience the same error after performing the steps above, then Canon mp510 Printer will require service to resolve the issue.  Please click on the contact with us at Canon customer service number to obtain your servicing options.

Dial Canon Customer Care Number To Receive Fast Resolutions & Help

 

You can call at Canon Customer Care Phone Number anytime from anywhere, and connect with the dazzling and experienced Canon Customer care support team. The proficient experts will give you the excellent guidance to troubleshoot this issue. In addition, you can get the hasty support & services to fix other kinds of Canon printer technical issues. Hence, call now toll-free number and connect with skilled technicians, who are available 24x/365 days for your help, and get support for further Canon printer queries.

30Nov/17
Canon Printer Error Code 5100

How to Fix Canon mx310/mx700/mx870 Printer Error Code 5100?

Here the blog about the discussion of Fix Canon mx700/mx870 Printer Error Code 5100. The error generally appears on the computer or printer display screen, when users doing printing task with their Canon Printer, and often they are unable to print. However, often Canon printer not printing well, and show error codes and issues, which is faced by many users. It is really annoying as asking your expensive Canon mx310/mx700/mx870 Printer to print an important document and seeing error code 5100 pops up instead of the neatly printed paperwork you need. Understanding the reason for the error code 5100 and what steps users should take to resolve the problem can have users back on track with the newly printed page-fast. Canon mx310/mx700/mx870 Printer is widely recognized for their outstanding performance and robustness. The canon printer models are no doubt the most sought after printers because of their rich attribute. So, when users face Canon mx310 Printer Error Code 5100, they need to contact with Canon printer tech support team, at dialing Canon technical support number which works 24×7 to help. Thus, users can follow some instructions described below to quickly solve the issue.

Methods to Fix Canon mx310/mx700/mx870 Printer Error Code 5100

Method 1:- Look Inside Canon mx310 Printer for a Tiny Object

When users as you face a Canon mx310 printer Error Code 5100 while doing printing task, then they immediate need to look inside for a tiny object like a piece of paper, a staple, etc. For this thing, the users the users will need firstly to turned off the Canon mx310 printer and the power cord unplugged. After, then they need to open the machine and inspect the inside. Verify that you see any stray pieces of paper along the paper’s usual route.  Also, look inside for a tiny object like a piece of paper, a staple.

After removing all the tiny objects, if you found, surely your issue will fixed.  In case, it’s not fixed, then you should continue to the next solution.

Method 2:- Execute Purge Procedure

Sometimes the issue Canon mx700 or Canon mx870 Printer Error Code 5100, fixed by applying the purge mechanism. The purge cap (the white sliding mechanism which the print head parks to when it is not in use) may be not lubricated well enough. Lubricate the sliders with some white grease (don’t get it on the small wipers or the black caps). This thing repair probably needs removing the right panel off of the printer to gain access to the purge mechanism.

Method 3:- Clean the Timing Strip

In case you are unable to remove the Canon mx310/mx700/mx870 Printer Error Code 5100, by performing the above steps, then you should try to clean the timing strip, then there is a thin plastic strip running across the width in front of and below the drive belt. There are five black vertical lines on this strip. If the strip gets a piece of crud on it, you get an Error Code 5100 during the start-up sequence. Then you should to gently clean this strip with a damp lint-free tissue or clean clothes.

Now again performing the printing task, and observe the issue is fixed. If not, then go to next solution.

Method 4:- Reset the Ink Absorber

You should try to reset the waste ink absorber on a Canon mx870 Printer, which might help to resolve Error Code 5100 which you are getting when doing the printing task.

Follow the steps to do the task:-

  • Make sure the Canon mx870 Printer is turned off.
  • Press and hold the “Resume” button (triangle inside a circle).
  • At the same time as it is held down, hold down the “Power” button. Then green led light will ON.
  • Keep the “Power” button held down. Then release the “Resume” button and then press it twice. The light should go amber, then green again.
  • Release the “Power” button.
  • Press the “Resume” button four times and then press the “Power” button straight after to confirm the selected action (Reset Counter Absorber).
  • Turn off the printer and then turn it on again.
  • Now start your work and observe still you are receiving an error. If yes, then go to the next step.

Method 5: – Reset the Ink Cartridges

You should try to reset the Ink Cartridges to resolve Canon mx310 or canon mx700 or Canon mx870 Printer Error Code5100.

  • Turn off the Canon mx310 or canon mx700 or Canon mx870 Printer and unplug it from the outlet.
  • Press the “On/Off” button while you plug the cable back in.
  • Hit the “Stop/Reset” button two times while holding down the “On/Off” button, then let go of the “On/Off” button. This puts the printer into factory mode.
  • Hit the right arrow button until you see “Shipping Mode 3” on the LCD display. Hit “OK” to select it.
  • Hit the “Stop/Reset” button when you see a message that says “Without Cleaning.” This tells the Canon printer to print out a test page.
  • Lift up the Canon MP 470 printer cover and wait for the cartridges to move to the left. Then unplug the printer from the outlet.
  • Lift out both ink cartridges and close the cover.
  • Plug the power cable back in and hit the “On/Off” button.
  • Place the ink cartridges back inside once you see a message that says “Replace Cartridges.”
  • Wait a few minutes for the printer to recognize the cartridges before trying to print.

Now check the error code 5100 is resolved, if not, then go to the next solution.

Method 6:- All Ink Tanks Remove and Reset

Finally, you should try to remove and reset “All Ink Tanks”, in order to resolve the Canon mx310/mx700/mx870 Printer Error Code 5100.

Related blog How to Fix Canon mp470 or mx472 Printer Error Code 5100?

Follow these steps to do the task:-

  • First, verify the paper feed areas of the printer, by using a flashlight of your mobile or other bright light. Also, verify that there are no paper jams or obstructions in the printer that may be causing the error.
  • Then look inside of the printer where the inks are located and ensure that there are no obstructions in there that may be causing the print head not to move freely.
  • Next, remove and reset all of the ink tanks inside the printer.

Dial us at Canon Customer Support Number for Online Help Immediately

 

Canon Customer Care Support Phone Number is available 24×7 hours to transport you the best possible solutions for your Canon Printer technical difficulties.  We are the renowned and independent Canon support providers and have backed by a team of proficient experts, who works all the time, day and night to users help. We are happy to serve the world’s class Canon printer solutions & support to our clients of their Canon mail account difficulties. The users just need to connect with our Canon support service team by dialing this toll-free number and get the right solution on immediate request by technicians to printer issues within a less period of time. Hence, for any canon printer technical errors or issues, users can contact us anytime, or connect with our canon customer care support helpdesk, to get the swift, hasty and reliable solutions for the same promptly.

29Nov/17
Canon Printer Error Code 5100

How to Fix Canon mp470 or mx472 Printer Error Code 5100?

It is not a difficult task to Fix Canon mp470 or mx472 Printer Error Code 5100, for users when they face such type of error while performing the printing task. Typically, this error is nothing more than a service error performed or caused when the movement of the FINE Cartridge Holder is blocked. However, there are cases when users face such type of Canon mp470 printer Error Code 5100, then they need to clear the paper jam or foreign object that is preventing the FINE Cartridge Holder from moving, cancel printing from your computer, then turn OFF the machine and turn it back ON again. This Canon mx472 Printer Error Code 5100 is a bigger to a certain platform and can be encountered by many numbers of when they are accessing the Canon printer and performing the printing task.  As a matter of fact, the users will need to immediately solve it. Then ring us at our Canon technical support number to immediately connect with professionals and get help to fix the issue. Well, the users can apply or follow some mentioned solutions to quick fix the issue.

Solutions to Fix Canon mp470 or mx472 Printer Error Code 5100

Solution 1:- Verify Inside Printer for a Tiny Object   

When you are receiving the Canon mp470 printer Error Code 5100, then should try to verify inside your Canon mp470 Printer for a tiny objects.

Follow these steps:-

  • You have to printer turned off and the power cord unplugged.
  • Then open the machine and inspect the inside. Verify that you see any stray pieces of paper along the paper’s usual route. Also, look inside for a tiny object like a piece of paper, a staple. If you are found tiny objects, then resolve the problem.

Then perform the printing task again and see the error is resolve, if not, then go to next solution.

Solution 2:- Clean the Timing Strip

Most of the time, the remedy of clean the Timing Strip fix the Canon mp470 Printer Error Code 5100. Then you should try to clean the timing strip, then there is a thin plastic strip running across the width in front of and below the drive belt. There are five black vertical lines on this strip. If the strip gets a piece of crud on it, you get an Error Code 5100 during the start-up sequence.

Then gently clean this strip with a damp lint-free tissue or clean clothes.

Now start your work and observe still you are receiving an error. If yes, then go to the next step.

Solution 3: – Reseat the Ink Cartridges On your Canon mx472 printer

If you encounter the Canon mx472 Printer Error Code 5100 while printing a documents. Then you should try to reseat the ink cartridges on your Canon mx472 printer.

  • Turn off the Canon mx472 printer and unplug it from the outlet.
  • Press the “On/Off” button while you plug the cable back in.
  • Hit the “Stop/Reset” button two times while holding down the “On/Off” button, then let go of the “On/Off” button. This puts the printer into factory mode.
  • Hit the right arrow button until you see “Shipping Mode 3” on the LCD display. Hit “OK” to select it.
  • Hit the “Stop/Reset” button when you see a message that says “Without Cleaning.” This tells the Canon mx472 printer to print out a test page.
  • Lift up the Canon mx472 printer cover and wait for the cartridges to move to the left. Then unplug the printer from the outlet.
  • Lift out both ink cartridges and close the cover.
  • Plug the power cable back in and hit the “On/Off” button.
  • Place the ink cartridges back inside once you see a message that says “Replace Cartridges.”
  • Wait a few minutes for the printer to recognize the cartridges before trying to print.

Now check the error is resolved, if not, then go to the next solution.

Solution 4:- Reset the Ink Absorber on Your Canon mx470 Printer

If the issue is not fixed, then you need to reset the Ink Absorber on Your Canon mx470 Printer

You should try to reset the waste ink absorber on a Canon mx470 printer, which might help to resolve Error Code 5100 which appear when turning on your Canon mx470 Printer.

Follow the steps to do the task:-

  • Make sure the printer is turned off.
  • Press and hold the “Resume” button (triangle inside a circle).
  • At the same time as it is held down, hold down the “Power” button. Then green led light will ON.
  • Keep the “Power” button held down. Then release the “Resume” button and then press it twice. The light should go amber, then green again.
  • Release the “Power” button.
  • Press the “Resume” button four times and then press the “Power” button straight after to confirm the selected action (Reset Counter Absorber).
  • Turn off the printer and then turn it on again.
  • Now start your work and observe still you are receiving an error. If yes, then go to the next step.

Solution 5:- Remove and Reseat All Ink Tanks

Resolve the Canon mx472 Printer Error Code 5100 by trying to remove and reseat “All Ink Tanks”.

Follow these steps to do the task:-

  • First, verify the paper feed areas of the printer, by using a flashlight of your mobile or other bright light. Also, verify that there are no paper jams or obstructions in the printer that may be causing the error.
  • Then look inside of the printer where the inks are located and ensure that there are no obstructions in there that may be causing the print head not to move freely.
  • Next, remove and reset all of the ink tanks inside the printer.

In this way you can easily Fix Canon mp470 or mx472 Printer Error Code 5100, by applying all the solutions.

Related blog How to Fix Canon mp460 Printer Error Code 5100?

In any situation, you need any help or doubt to follow the above steps, then you should contact our Canon Customer Care Support Number to connect with professionals to obtain rapid help.

Contact at Canon Customer Support Number To Get Online Help & Solutions

 

You can contact at Canon Customer Care Support Phone Number anytime from anywhere, as this number is accessible 24×7 days for your help. The number will directly connect you with our team of certified and talented Canon care support professionals, where you get immediate online help. The professionals will listen to your Canon printer problems & help to solve them instantly either it’s complicated or complex within a few minutes. Hence, contact to our talented technicians now and grab the best possible solutions to Canon printer technical issues.

28Nov/17

How to Fix Canon mp460 Printer Error Code 5100?

The users of Canon mp460 Printer may encounter the Error Code 5100 when they accessing the Canon printer and performing the printing task. Many numbers of users complaint to receive the Error Code 5100 on their computer or printer display screen, when they doing the printing task with their Canon mp460 Printer and often they are unable to print with that.  You probably come across such type of Error Code 5100, and you will need to immediate Fix Canon mp460 Printer Error Code 5100. The main cause Error 5100 is a carriage error that can usually be fixed by using service mode and flushing the printer heads when it has a blockage. Then don’t worry about anything! Solving Canon mp460 Printer Error Code 5100 is not a big issue for you. Here the blog will guide you some easy methods to resolve the error.

Solutions to Fix Canon mp460 Printer Error Code 5100

Solution 1:- Verify Inside Printer for a Tiny Object   

  • First, you have to printer turned off and the power cord unplugged.
  • Then open the machine and inspect the inside. Verify that you see any stray pieces of paper along the paper’s usual route. Also, look inside for a tiny object like a piece of paper, a staple.

If you are found tiny objects, then you should go to next solution.

Solution 2:- Clean the Timing Strip

You should try to clean the timing strip, then there is a thin plastic strip running across the width in front of and below the drive belt. There are five black vertical lines on this strip. If the strip gets a piece of crud on it, you get an Error Code 5100 during the start-up sequence.

Then gently clean this strip with a damp lint-free tissue or clean clothes.

Solution 3: – Reseat the Ink Cartridges On your Canon mp460 printer

  • Turn off the Canon mp460 printer and unplug it from the outlet.
  • Press the “On/Off” button while you plug the cable back in.
  • Hit the “Stop/Reset” button two times while holding down the “On/Off” button, then let go of the “On/Off” button. This puts the printer into factory mode.
  • Hit the right arrow button until you see “Shipping Mode 3” on the LCD display. Hit “OK” to select it.
  • Hit the “Stop/Reset” button when you see a message that says “Without Cleaning.” This tells the Canon mp460 printer to print out a test page.
  • Lift up the Canon mp460 MP 470 printer cover and wait for the cartridges to move to the left. Then unplug the printer from the outlet.
  • Lift out both ink cartridges and close the cover.
  • Plug the power cable back in and hit the “On/Off” button.
  • Place the ink cartridges back inside once you see a message that says “Replace Cartridges.”
  • Wait a few minutes for the printer to recognize the cartridges before trying to print.

Now check the error is resolved, if not, then go to the next solution.

Solution 4:- Reset the Ink Absorber On Your Canon mp460 Printer

You should try to reset the waste ink absorber on a Canon mp460 printer, which might help to resolve Error Code 5100 which appear when turning on your Canon mp460 Printer.

Follow the steps to do the task:-

  • Make sure the printer is turned off.
  • Press and hold the “Resume” button (triangle inside a circle).
  • At the same time as it is held down, hold down the “Power” button. Then green led light will ON.
  • Keep the “Power” button held down. Then release the “Resume” button and then press it twice. The light should go amber, then green again.
  • Release the “Power” button.
  • Press the “Resume” button four times and then press the “Power” button straight after to confirm the selected action (Reset Counter Absorber).
  • Turn off the printer and then turn it on again.
  • Now start your work and observe still you are receiving an error. If yes, then go to the next step.

Solution 5:- Remove and Reset All Ink Tanks

Resolve the issue by trying to remove and reseat “All Ink Tanks”.

Follow these steps to do the task:-

  • First, verify the paper feed areas of the printer, by using a flashlight of your mobile or other bright light. Also, verify that there are no paper jams or obstructions in the printer that may be causing the error.
  • Then look inside of the printer where the inks are located and ensure that there are no obstructions in there that may be causing the print head not to move freely.
  • Next, remove and reset all of the ink tanks inside the printer.

I hope your issue is fixed.

Related blog How To Fix Canon Printer Error 5012?

In case, if you are still experiencing the same error, then you should contact our Canon Customer Service team to obtain quick help.

Dial Canon Printer Support Number For Speedy Help To Fix Problems

You can contact at Canon Printer Customer Support Phone Number, which is a toll-free and available 24×7 hours for your help.  We are independent Canon pointer support providers and provide 24*7 online support for your Canon Printer queries. A team of well-experienced and certified technicians is available round the clock to resolve your Canon Printer technical issues. It assures you will grab the swift, hasty and perfect solutions to any kind of Canon Printer technical issues & errors at a reasonable cost. Hence, call now for a toll-free number to instant help for Canon Printer mishaps.

18Nov/17

How To Fix Canon Printer Error 5012?

This error code executes generally on Canon MG5522. When users come across this error code then, it signifies that there is no paper or you have stuck paper just under the print head, etc. also, users may come across sensor issues while the Canon printer error executes. Below we have two methods to fix Canon Printer Error 5012 with detailed explanation.

Methods to troubleshoot fix Canon Printer Error 5012

Methods 1:  If the printer has an internal hardware issue then, follow below steps as mentioned
Check just inside the Canon printer for any jam paper and any obstruction is there.

The next thing is to ensure that ink tanks are inserted correctly.
Finally, users are requested to unplug the power cord from the back side of the printer for at-least twenty seconds. Plug in the power cord after twenty seconds and turn the printer back on.
The printer needs to replace if these steps do not solve your problem.

Method 2: If the error is related to scanner then, follow these steps

It is possible that these things can occur in the MG5522 which can cause this. The first thing is simply to open the cover of the printer to perform a thorough check of ink. Turn on the Canon Printer MG5522 When the ink carriage comes in the middle section, just close the cover. If the error still persists then, it is recommended to go for immediate servicing. Users are advised to have a proper note the ink cartridge is not supposed to move when they have turned on the printer. It needs to be moved manually by turning the wheel in the back so that the paddle can be easily moved back so that the ink catridge is movable.

Related Blog How To Fix Canon Printers 1E3 Error Code?

 

Connect to us at Canon Printer Support Number for instant solutions to your problems

Call us at Canon Printer Customer Support Number to help us assist you in resolving wide number of issues for Canon printer problems by delivering absolute solutions. We are available 24 hours to bring users one-of-a-kind solution at their desk. Come and explore our solutions right now so that you never miss out on any chance

17Nov/17

How to Fix Canon Printer Error Code 5101?

Canon Printer is not working and showing an Error Code 5101 on the computer printer display screen. A Printer error has occurred. When trying to remove the protective material from the printer. Well, many numbers of Canon Printer user’s complaint to get this annoying error code. When this error occurs, the users are unable to work in the proper way. So, if you are facing exactly the same issue, with your Canon Printer, and getting Error Code 5101, then you don’t need to worry about it, in fact it’s time to immediately fix it. As it’s suggested by the Canon Printer customer support team, the issue could be easily fixed. Then you will need to apply the same troubleshooting solutions to fix the issue. Here the blog will guide you quick and easy solutions on How to Fix Canon Printer Error Code 5101?  To do this, just follow the steps here.

Steps to Fix Canon Printer Error Code 5101

Solution 1:- Turn On Power of Canon Printer

When the error code 5101 printer error has occurred. The best suggestion for you to turn off power then back on again.

Follow the steps to do this task:-

  • First of all, disconnect the power cable from the Canon printer while the printer is still ON.
  • Then disconnect any other cables if connected the printer.
  • Press and hold the printer’s power button for 15 seconds.
  • Then the printer should be directly connected to the wall outlet and not to a surge protector. Next, reconnect the power cable to print and the printer should power ON by itself.
  • If the printer doesn’t power ON, then please manually power it ON.

In case, if the problem persists, then you will need to see the manual.” is displayed, the behavior of the print head holder is interrupted.

Solution 2:- Check Your Canon Printer Functionality

You should need to verify that Canon Printer functionality, by the following way:-

  • Ensure that if the Canon printer is connected, Wireless, Ethernet, or USB.
  • Ensure that if the Canon printer is able to make copies of itself.
  • Ensure that if the Canon printer power cable plugged into a surge protector, or directly to the wall outlet.

Solution 3:- Check Securing Material for the Holder Inside the Printer

Step 1:- Check, Is there a securing material for the holder inside the printer?

There may be a securing material for the holder inside the Canon printer. (This material must be removed before using the printer.)

Follow the steps to do this task:-

  • Open the Top Cover of the Canon printer, if the protective material is attached to the holder, remove it.
  • Then remove the securing material for the holder (With the securing material).

Canon Error Code 5101

  • Then, close the cover, and then turn ON the printer again.

Step 2:- Check, Is there a jammed paper or foreign material inside the printer?

You should need to check there is not Paper jam.

Follow the steps to do this task:-

  • Stop printing, then push the power button of the printer to turn OFF the printer.
  • Open the Top Cover of the printer; then,
  • If there is a jammed paper or foreign material inside the printer, remove them.
  • After checking the above items, push the power button to turn ON the printer again.

Note:-

When removing the jammed paper or foreign material, take extra care so that you do not touch the inner parts. Or, it may cause another printing problem.

Step 3:- Check, Is the ink tank properly installed?

You will need to verify that, if there the ink tank is properly installed, it interferes with the operation of the print head.

Get an idea of proper print head position by the below image.

Case 1:- When the ink tanks are not properly installed, then ensure these things:-

  • Make sure that the ink tank is not set firmly.
  • Make sure that ink lamp is not turned ON.

 

Case 2:- When the ink tanks are properly installed

Canon Pixma Error Code 5101

  • Make sure that the ink tank is not set firmly.
  • Make sure that the ink lamp is not turned ON.

Note:-

  • Always remember “Do not touch the Print Head Holder while it is moving.”.
  • Wait until the Print Head Holder automatically stops.
  • Do not even attempt to stop/move the Print Head Holder by holding it.

Related Blog How to Fix Canon Printer Error Code 5100?

If the problem still persists, then you should contact our Canon Printer Customer Support team for immediate get help.

Canon Customer Support Phone Number For Instant Online Help to Canon Issues

You can call at Canon Customer Support Phone Number anytime, which is available 24×7 day and night to your online help. Through number, you will be easily connected with the team of proficient and certified Canon Customer Support, where technicians will give you the perfect and effective services to resolve your Canon technical issues or errors. The professional works day and night to your assistance with every possible solution to get your Canon technical queries resolved in a less time. Hence, connect with experts now to get a further help.

14Nov/17

How to Fix Canon Printer Error Code 5100?

Users from all around the world are reporting on getting the problem with the Canon Printer and got Error Code 5100 on their computer display screen. The Error Code 5100 is indicating that there the ink carriage has problems. Typically something currently is hammed the cartridge carriage.  So, Error 5100 is related a carriage error which can generally be fixed by using service mode and flushing the printer heads when it has a blockage and using other troubleshooting solutions. So, if you are facing the exact same problem with your Canon Printer, then you don’t need to worry about it.  Here, the blog will guide very easy steps to “How to Fix Canon Printer Error Code 5100? So, you just need to follow the below solutions or step to quickly solve the error.

Solutions to Fix Canon Printer Error Code 5100

Solution 1:- Verify Inside Printer for a Tiny Object   

  • First, you have to printer turned off and the power cord unplugged.
  • Then open the machine and inspect the inside. Verify that you see any stray pieces of paper along the paper’s usual route. Also, look inside for a tiny object like a piece of paper, a staple.

If you are found tiny objects, then you should go to next solution.

Solution 2:- Apply Purge Mechanism

The purge cap (the white sliding mechanism which the print head parks to when it is not in use) may be not lubricated well enough. Lubricate the sliders with some white grease (don not get it on the small wipers or the black caps). This thing repair probably requires removing the right panel off of the printer to gain access to the purge mechanism.

Solution 3:- Clean the Timing Strip

You should try to clean the timing strip, then there is a thin plastic strip running across the width in front of and below the drive belt. There are five black vertical lines on this strip. If the strip gets a piece of crud on it, you get an Error Code 5100 during the start-up sequence.

Then gently clean this strip with a damp lint-free tissue or clean clothes.

Solution 4: – Reseat the Ink Cartridges

  • Turn off the Canon printer and unplug it from the outlet.
  • Press the “On/Off” button while you plug the cable back in.
  • Hit the “Stop/Reset” button two times while holding down the “On/Off” button, then let go of the “On/Off” button. This puts the printer into factory mode.
  • Hit the right arrow button until you see “Shipping Mode 3” on the LCD display. Hit “OK” to select it.
  • Hit the “Stop/Reset” button when you see a message that says “Without Cleaning.” This tells the Canon printer to print out a test page.
  • Lift up the Canon MP 470 printer cover and wait for the cartridges to move to the left. Then unplug the printer from the outlet.
  • Lift out both ink cartridges and close the cover.
  • Plug the power cable back in and hit the “On/Off” button.
  • Place the ink cartridges back inside once you see a message that says “Replace Cartridges.”
  • Wait a few minutes for the printer to recognize the cartridges before trying to print.

Now check the error is resolved, if not, then go to the next solution.

Solution 5:- Reset the Ink Absorber

You should try to reset the waste ink absorber on a Canon printer, which might help to resolve Error Code 5100 which appear when turning on your Canon Printer.

Follow the steps to do the task:-

  • Make sure the printer is turned off.
  • Press and hold the “Resume” button (triangle inside a circle).
  • At the same time as it is held down, hold down the “Power” button. Then green led light will ON.
  • Keep the “Power” button held down. Then release the “Resume” button and then press it twice. The light should go amber, then green again.
  • Release the “Power” button.
  • Press the “Resume” button four times and then press the “Power” button straight after to confirm the selected action (Reset Counter Absorber).
  • Turn off the printer and then turn it on again.
  • Now start your work and observe still you are receiving an error. If yes, then go to the next step.

Solution 6:- Remove and Reseat All Ink Tanks

Resolve the issue by trying to remove and reseat “All Ink Tanks”.

Follow these steps to do the task:-

  • First, verify the paper feed areas of the printer, by using a flashlight of your mobile or other bright light. Also, verify that there are no paper jams or obstructions in the printer that may be causing the error.
  • Then look inside of the printer where the inks are located and ensure that there are no obstructions in there that may be causing the print head not to move freely.
  • Next, remove and reset all of the ink tanks inside the printer.

Related Blog How to Fix Canon Printer Error Code B200?

If you still experience the same error, after performing the steps above, the printer will require service to resolve the issue, or you can approach us to get instant solutions.

Contact Now At Canon Printer Support Phone Number For Immediate Help

You can contact us anytime, by dialing Canon Printer Support Phone Number, which is a toll-free and available 24×7 days for your help. By dialing this number, you will be easily connected with a team of well-experienced and certified technicians, who will give you flawless technical help & support to fix your problem. We assure you will get the excellent, hasty and finest solutions to fix the technical problems at a reasonable cost.